RMS20-PS-A20

Electrical performance meets the "IEC" standard;
Accurate positioning, small size, and convenient installation and debugging.

Product Detail

◼︎ Can be tested in a non-contact manner, so there will be no wear or damage to the tested object

◼︎ Adopting contactless output mode, thus extending service life

◼︎ Unlike light detection, it is suitable for use in environments such as water and oil

◼︎ Almost unaffected by stains, oil, water, etc. of the tested object during testing

◼︎ Compared to contact switches, it can achieve high-speed response

◼︎ Contactless induction operation mode, without mechanical movement, directly installed in the original overload switch position without changing the elevator structure;

◼︎ Adopting high-strength induction magnets to maximize the system's anti-interference ability;

◼︎ Electrical performance meets the 'IEC' standard;

◼︎ Accurate positioning, small size, and convenient installation and debugging.

Standards	IEC/EN 60947-5-2
Enclosure	Glass-fibre PA
Operating principle	Magnetic
Contact variants	NO
Switching voltage	Max.150VAC
Switching current	Max.1A
Switching capacity	Max.20VA/W
Dielectric strength	200 V
Switching speed	Max.2ms
Switching frequency	< 500Hz
Switching time'closing'	0.02ms
Switching time'opening'	2ms
Bounce time	0.6ms
Ambient temperature	-20 ... +60℃
Mechanical life	Min. 10⁸
Electrical life	1million-1 billion
Repeatability	±0.25 mm
Protection class	IP67-EN60529
Size	70 × 70 × 60 mm
Slot opening	20 mm
Cable length	2m(standard)