LC-MV59X

This device is suitable for all mobile car bottom elevators that require overload signals and escalators that require energy-saving operation. It has a high cost-effectiveness and overcomes the inherent disadvantage of low sensitivity of mechanical overload switches.

Product Detail

◼︎ Contactless induction operation mode, without mechanical movement, directly installed in the original overload switch position without changing the elevator structure;

◼︎ Adopting high-strength induction magnets to maximize the system's anti-interference ability;

◼︎ Electrical performance meets the 'IEC' standard;

◼︎ Accurate positioning, small size, and convenient installation and debugging.

Detection distance	2 ... 9mm +15%
Movement differential	15% maximum sensing distance
Detection object	Magnetic steel
Response frequency	0.2KHz
Input voltage	12 ... 24VDC
Type of output	Relay output (1 normally closed, 1 normally open)
Indicator light	Red LED (signal output)
Temperature effect	The working temperature range is -20~+60℃, which is less than 5% of the detection distance at 23℃
Voltage influence	Within the range of ± 10% change in rated voltage, the rated voltage is detected to be below 2.5%
Insulation impedance	50M Ω
Insulation strength	Insulation voltage 500V per minute
Connection method	Lead out type (standard length 1.2 meters)
Size	Φ24 × 90 mm